5 Easy Bike Maintenance Tips

Riding a bike is good for health or weight loss. However, a bike can only serve this purpose if it is maintained well. A bike that is maintained works smoothly, lasts longer and is less prone to accidents.

bike

It is uncommon to find people who do not know how to maintain their bikes in the right manner. Here are the top five tips you need to consider.

Keep the Tires Inflated

The pressure of the tires has a significant impact on the quality of a bike. A low tire pressure means that you have to work harder on the pedals to keep the right speed than tires with high pressure. Tires with low pressure are also more susceptible to flats than those that are well inflated.

You need to invest in a quality floor pump with a gauge to help keep the pressures of the tires at suitable levels. The rear tire should have more pressure since it handles most of the weight. You should check the pressure of the tires at least once in two weeks.

In case you are changing a tire, run your fingers along the inside of the rim to check for foreign objects. Foreign objects such as gravel or pieces of glass can pinch the tire against the rim and cause a flat. Also, check the new tube to make sure it is not caught between the tire and the rim.

Adjust the Brakes Correctly

You want to make sure your brakes respond correctly when you need them. They can only perform correctly if you adjust and repair them.

You first have to test the performance of your brakes by pressing the brake levers while the bike is moving. If you pull the lever until it touches the handlebar, then your brakes need some adjustments.

You can adjust the brakes using the barrel in the brake lever. Making the screw in the barrel tight moves the brake pads closer to the rim. You may also unscrew the bolt holding the wire and straighten or tighten the wire before screwing the bolt back.

It is also imperative you keep the pads and all components of the braking system free from dirt. You can use alcohol-based products for cleaning.

Clean Your Bike Regularly

A clean bike is easier to ride than one with mud and dirt everywhere. It also becomes easier to spot a problem and deal with it without too much trouble if your bike is clean. For instance, fixing a flat tire is often difficult when the bike is dirty because you cannot locate the point of puncture.

All you need to clean your bike is a bucket of warm water, detergent that cuts grease, a few sponges and at least two brushes. Make sure you wet the entire bike to loosen any mud or grime before you use the brush. This way, you won’t scratch the paint, which is what normally happens when you begin scratching with a brush before wetting the whole surface.

Make sure every part of the bike is clean, including the brake pads and rims. It is also a good idea to inspect the bike for any faults as you clean.

Keep the Drivetrain Lubricated

A bike that produces a rattling and squeaking sound is embarrassing and annoying, especially when you are riding in a group. You can save yourself from the embarrassment by cleaning and greasing your drivetrain regularly. The squeaking sound is produced when the metals rub against each other due to insufficient grease.

It is also not cheap to replace the worn out parts, so make sure you regularly clean and grease the drivetrain to save some money. You will require some rags, bike oil and de-greasers. You may also require a toothbrush and screwdriver to access the inner parts of the chains and wheels.

Make Sure the Bolts and Nuts are Tight

Make sure all the screws, bolts and nuts in the bike are where they should be by checking if they are loose. Screws and bolts often come off as a result of the constant vibration when you are riding. Some bolts, especially those holding the head tube and handlebars, can cause serious accidents when they come off.

Make sure you don’t tighten the bolts too much. Some bolts have the torque limit written on them. You can buy a bike multi-tool that applies only a specified amount of torque.

Share Button

What is the best way to store your bike?

If you have spent money on a decent bike you want to do everything you can to make sure it remains in good condition. With this in mind, you need to pay attention to bike parking and storage. It’s important to make sure that your bike is always stored in a secure manner, and that it’s best protected against wear and tear.

 store your bike

We are going to look at how you should store your bike once you have finished riding. We are also going to give you some other tips on how to best take care of your bike.

Storing your bike after riding

It’s not a good idea to store your bike on its tyres, so you may want to think about hanging your bike. This storage solution has the added advantage of being useful if you have a limited amount of space. Alternatively, you can invest in a hoist which enables you to suspend your bike from the ceiling. Wherever you decide to store your bike, it’s important that you protect it from the elements and that you ensure it is secured. You do not want someone to just be able to drive up and throw your bike into the back of a van.

Other tips for taking care of your bike

If you want your bike to remain in good working order, it’s important that you take good care of it. Here are some useful tips on how to do this.

  • No matter how much of a rush you are in, never put your bike away dirty, after a ride. It’s worth spending just a few minutes wiping off the grime and dirt, to protect its condition.
  • Never ride your bike if any of the parts need replacing. As soon as you notice that frayed brake cable, get it replaced. It’s just not worth taking the risk of having an accident, or your bike breaking down when you are miles away from home.
  • Never carry out maintenance on your bike if you do not have the expertise, or the tools that you need. If you attempt to do this you could be doing more harm than good.
  • Always check the tyre pressures before you ride. Make sure that there is enough air in the tyre, but never over inflate. Remember that tyre pressures should be adjusted for weather conditions. The pressure should normally be a little lower for bad road conditions than for good; this enables you to have better contact with the road surface.

All of these tips can help you keep your bike in good condition.

Hopefully, we have shown you how important a good storage solution is in helping to maintain the condition of your bike. It’s one of the most important factors in an overall bike care routine. If you look after your bike, and store it wisely, you should help extend its life and maintain its performance levels.

Share Button